Latest News

Welcome to our new 'Mobile Friendly' website. 

Coming soon will be a "buy online option" for some of our BEST selling products....

  Contact

Unit 5, Block B, St Michaels Industrial Estate, Widnes, Cheshire WA8 8TL
Tel: 0151 424 2992
Email: info@anti-ligature-shop.co.uk

Search

Bath Filling Plate with Half-Fill/Full-Fill Indication

Bath filling plate with half-fill/full-fill indication - Plate only. 2 x tactile switches required

Product Code: SH07-054

Bath Filling Plate with Warm/Cold Indication

 

Bath filling plate with warm/cold indication - Plate only. 2 x tactile switches required

Product Code: SH07-055

Dart valleu 2 Channel Bath Fill Control Box C/W 6 x AA Batteries

The bath filling control system (SH07-021) can be used with wave-on or tactile switches. The half fill level is half that of the full fill which is adjustable. There are a number of kits available to suit a wide range of requirements. Benefits of the bath filling control system are similar to the shower control system except that it operates a single valve post thermostatic mixer, with the option of hot and cold if required. – Control box only – Complete with 6 x AA Batteries

Product Code: SH07-021

 

Dart Valley 2 Channel Bath Fill Control Box C/W 6 x Cell Batteries

The bath filling control system (SH07-022) can be used with wave-on or tactile switches. The half fill level is half that of the full fill which is adjustable. There are a number of kits available to suit a wide range of requirements Benefits of the bath filling control system are similar to the shower control system except that it operates a single valve post thermostatic mixer, with the option of hot and cold if required. – Control box only – Complete with 6 x C Cell Batteries

Product Code: SH07-022

Dart Valley 2 Channel Shower Control Box - C/W 6 x C Cell Batteries

The shower control system can be used for 1 or 2 showerheads. The control system will effectively give any standard showerhead automatic wave-on control. The shower control system also features a built-in purge control option to avoid stagnation. When a user waves their hand past the sensor (or pushes the tactile switch) the control system activates the solenoid valve and will run for a pre-set time before automatically closing the valve and stopping the shower. Various settings can be customised quickly and easily from within the control box if necessary. – Control box only – Complete with 6 x C Cell Batteries

Product Code: SH07-003

Dart Valley 2 Channel Shower Control Box C/W 6 x AA Batteries

The shower control system can be used for 1 or 2 showerheads. The control system will effectively give any standard showerhead automatic wave-on control. The shower control system also features a built-in purge control option to avoid stagnation. When a user waves their hand past the sensor (or pushes the tactile switch) the control system activates the solenoid valve and will run for a pre-set time before automatically closing the valve and stopping the shower. Various settings can be customised quickly and easily from within the control box if necessary. – Control box only – Complete with 6 x AA Batteries

Product Code: SH07-002

Dart Valley 55mm Spout for Bath

55mm Spout for bath

Product Code:AT07-059

Dart Valley A Lead Y Splitter Lead

Y Splitter Lead 

Product Code: AT00-037

Dart Valley B Lead Automatic Tap Battery Pack

Comeplete With box and lead 

Product Code:AT00-024

 

Dart Valley Bath Control System For Use With Bath Filling Plates (Control Box Only)

The bath filling control system (SH07-020) can be used with wave-on or tactile switches. The half fill level is half that of the full fill which is adjustable. There are a number of kits available to suit a wide range of requirements Benefits of the bath filling control system are similar to the shower control system except that it operates a single valve post thermostatic mixer, with the option of hot and cold if required

Product Code: SH07-020

 

Dart Valley controls

Washroom control system - control box only


The Washroom Control System has been specially designed to meet the requirements of the modern day safe-ensuite in mental health units, prisons and police cells.
Dart Valley Systems also offer individual controls for taps, showers or WC flushing, however the Washroom Control System offers an outstanding value for money all encompassing control package.
Capable of managing:
- DVS WC Flushvalve
- Shower control
- Call-out button for manual or computer interfacing
- Hot and cold tap control (ideal for controlling the DVS high security backplate with in-built water spouts)
- All of the above controls have the built in option of ‘Lock-Out’, to limit the amount of operations in each period of adjustable run times

Features include:
- Multi-function unit from one control
- Variable functions allowing custom setups to suit individual requirements
- Optional reset or lock-out feature from a keyswitch controlled pad- Lock-outs (selectable)

- Optional call-out button
- Can be integrated to monitor water usage and number of times used
- Covers a variety of uses (reduces installation and unit cost dramatically)
- Purge facility
Standard kit includes:
- 1 x control box
- 1 x WC flush valve
- 3 x wave-on sensors (1 for WC, 2 for basin)
- 2 x solinoid valves for tap control plus 3m connection wires
Product Code: VR07-002

 

 

 

Single Station Battery Kit Standard Pressure 1-10 BAR

Standard pressure – 1-10 BAR, Complete with battery, solenoid valve & y-splitter lead

Product Code: AT00-001

 

 

 

Single station mains kit standard pressure 1-10 BAR

Standard pressure – 1-10 BAR, Complete with power supply unit, solenoid valve & y-splitter lead

Product Code: AT00-002

 

 

 

Two Station Mains Kit Standard Pressure 1-10 BAR

Standard pressure – 1-10 BAR, Complete with power supply unit, 2 x Solenoid valve, 2 x y-splitter leads & 1 x t-piece

Product Code: AT00-003

Dart Valley Hand Held Programmer With USB Interface

The programmer will allow quick and easy adjustment of settings including; run-on time, range, purge and more. Real time data can be uploaded from the programmer via the USB port to allow accurate monitoring of water efficiency.

Product Code: AC01-001

Dart Valley High Security Bath Filling Backplate (Not Including Sensors)

The high security bath filling backplate, is constructed from resin, which is virtually indestructible and is to be used in conjuction with the SH07-020 bath control system. This backplate can be used with wave-on sensors or tactile switches. Required to ordered seperately.

Product Code: VR01-024

Dart Valley High Security WM Bath Spout 45° (113mm Long From Top) C/W Un- Restricted Aerator

45˚ High Security Bath Spout. Ligature-resistant design, complete with unrestricted aerator.
Anti-rotation pins. Brushed Stainless Steel finish.

Features:


Bath filling spout
316 Stainless steel
Surface finish brushed
Weight 0.70kg
Operation type- separate sensor
Type of mouting - wall mounted 3/4'' BSP Thread (longer threads available)
Type of mixing - Additional TMV required (available separately)
spuout Prijection-76mm
Minimum flow pressure - 1 BAR
Water commection- copper pipe Via standard compression fitting

Aerator
Material - Plasic
Flow Rate(LPM) Unrestricted.

Product Code:SH07-043

Dart valley Wall Mounted Brushed Stainless Steel Shower Sensor

The NEW wall Mounted Programmable Sensor is to be used in conjunction with the handheld programmer (AC01-001). The programmer will allow quick and easy adjustment of settings including; run-on time, range, purge and more. Real time data can be uploaded from the programmer via the USB port to allow accurate monitoring of water efficiency.

Product Code: AC02-021

Shower Control System 1 Station Kit Tactile Switch With 50mm Bezel Tactile Switch Comes With 8m Cable

The shower control system can be used for 1 or 2 showerheads. The control system will effectively give any standard showerhead automatic wave-on control. The shower control system also features a built-in purge control option to avoid stagnation. When a user waves their hand past the sensor (or pushes the tactile switch) the control system activates the solenoid valve and will run for a pre-set time before automatically closing the valve and stopping the shower. Various settings can be customised quickly and easily from within the control box if necessary. – One station kit – Tactile operation

Product Code: SH07-012

Shower Control System 1 Station Kit Wave On Sensor Sensor Comes with 8m Cable

The shower control system can be used for 1 or 2 showerheads. The control system will effectively give any standard showerhead automatic wave-on control. The shower control system also features a built-in purge control option to avoid stagnation. When a user waves their hand past the sensor (or pushes the tactile switch) the control system activates the solenoid valve and will run for a pre-set time before automatically closing the valve and stopping the shower. Various settings can be customised quickly and easily from within the control box if necessary. – One station kit – Wave-on operation

Product Code: SH07-010

Shower Control System 2 Station Kit Tactile Switches With 50mm Bezels Tactile Switch Comes With 8m Cable

The shower control system can be used for 1 or 2 showerheads. The control system will effectively give any standard showerhead automatic wave-on control. The shower control system also features a built-in purge control option to avoid stagnation. When a user waves their hand past the sensor (or pushes the tactile switch) the control system activates the solenoid valve and will run for a pre-set time before automatically closing the valve and stopping the shower. Various settings can be customised quickly and easily from within the control box if necessary. – Two station kit – Tactile operation

Product Code: SH07-013

Shower Control System 2 Station Kit Wave On Sensors Sensor Comes With 8m Cable

The shower control system can be used for 1 or 2 showerheads. The control system will effectively give any standard showerhead automatic wave-on control. The shower control system also features a built-in purge control option to avoid stagnation. When a user waves their hand past the sensor (or pushes the tactile switch) the control system activates the solenoid valve and will run for a pre-set time before automatically closing the valve and stopping the shower. Various settings can be customised quickly and easily from within the control box if necessary. – Two station kit – Wave-on operation

Product Code: SH07-011