Description

Each doortop alarm differs from customer to customer – depending on the their requirements  – Please contact Anti-ligature shop for a bespoke specification and quote

The Door Top Alarm connects via mains power and is compatible with most staff attack systems.  It can alert staff via audible alarm, visible light, staff indicator panel and via the pager or main computer.

If the top of the alarm is pressed nothing will happen until the programmed delay setting in the electronic box is activated. It has a three tiered LED system on the door top alarm which is mirrored on the electronic bod, and optionally on nurse stations. LED lighting shows it working without setting the alarm off, helping with risk assessment period checks. LED is not visible to patients. An inspection magnet is used to aid installation and carry our risk assessments.

The electronic box is housed in ceilings/lofts and connects to the mains power and staff attack system. Power transfer to the door goes via Intastop’s Electrical Transfer Hinge which ensures all cabling and electronics are concealed.

A commissioning and planned preventative maintenance program is offered as an additional service.  Please contact our sales department for full details of what is included.

Features

• Fire tested to BS476: Part 20 & 22 for 30 minutes.
• Programmed electronics box with delay setting options.
• Connects to existing staff attack system.
• Suitable for both single and double acting hinges.
• Suitable for refurbishment and new build.

Benefits

• Helps prevent suicide at the top of doors.
• Can be used across a multiple of applications including bedroom and bathroom doors.
• Enables staff to respond immediately to attempted suicides and emergency situations.

Disclaimer: Please note that Intastop offers a range of measures designed to minimise the risk of self-harm, and does not offer any guarantee that it will not take place.  The solutions have been designed as a deterrent only.

Product Description

This tamper proof system detects when weight
is applied to the top of the door and has a
variable alarmed delay setting. The Door Top
Alarm connects via mains power and is
compatible with most staff attack systems.
Power transfer to the door goes via Intastop’s
Electrical Transfer Hinge which ensures all
cabling and electronics are concealed.

Maintenance / Cleaning

The Electrical Transfer Hinge operates by a number of interlocking gears that provide high
strength and a smooth motion. They require minimal maintenance, by following the procedures
below on a quarterly basis the product will perform effectively.
Check the gears are free from dust/debris.
Check the bearings are free from cracks.
Check all fixings are present and tightened sufficiently.
If dirty wipe down with warm soapy water.
Check for any sharp edges caused by impact damage and file smooth if necessary.

Intastop’s Door Top Alram is Designed for 44mm doors. For any other sized doors, please contact our technical team for advice.

The Door Top alarm works in conjunction with intastop’s Electrical Transfer Hinge.

For reduced ligature in single swing applications it is recommended this is fitted in conjunction with the domed cap.

Door Core:Solid or Style and Rail core (exposed lipping is not recommended)

Please contact Anti-ligature shop for a bespoke specification and quote